闡述

Summary

圈圓機是產出石材圈圓的公用設施準備，為三滾式圈圓機。其的布置秉公、調濟便民、產出請求效力高、操控簡潔明了，并可在圈圓過程中中圈壓出對補焊口處兩直邊，為下一些環節對焊塑造優秀的基礎, 資源板材的厚度不夸越4.5mm。This coiler machine is special equipment that is used for steel plate coiling. It has reasonable structure with 3 rollers type design, convenient adjustment, high efficiency and simple operation, and also it can press out straight flange on the two sides of welding joint in the coiling process to lay a good foundation for the next working procedure butt welding except the material exceed 4.5mm.

該紫裝要具備彩印和壓平的兩重功能主治。此中彩印用作在輪輞板料毛胚上壓出所需用的圖標，如輪輞的尺寸、主要參數、產地廠家代理商、產地起止日期特點，壓平則是為將來電焊焊接。This is special equipment for rim production, which has dual function of stamping and flattening. The stamper of it is used to press the needed marks on the rim band, including specification, model, manufacturer, production date etc. It flattens weld joint for the following welding operation.

核心工作程序是：被動上料機à打印紙à圈圓à壓平焊接Automatic operating for feeding-stamping-coiling-flattening weld joint

裝置方式 概況

Equipment Structure Introduction

銑床由活躍給料系統、打字系統、卷圓機和壓平系統四輪廓線定義。The equipment includes four parts：automatically feeder, stamper, coiler and flattening device.

放卷臺由方鋼管熔接而成，上置鋁鋁材放卷固定支架，代替放卷自覺送進。The feeding platform is welded with structure steel, on which place aluminous feeding rack for material automatically feeding.

彩噴機機由長短倆個壓紋輥具有，彩噴機用的字頭裝鄙人輥子，可按照其需要很便捷的更調。當上料進壓紋輥內時，勉勵壓紋輥起頭扭動，將鋼字逐行壓紋在板料上，并將壓紋好的板料贈送，自后壓紋輥經過流程汽缸自主規復原位，成了順應時勢有什么區別板厚的post請求，兩壓紋輥的接縫處還可以手工制作調節。The stamper is made of upper and lower roller. The marking unit is installed on the lower roller, which is easy to change by requirement. When the steel card is feed into the press-stamping roller, push roller to make it roll and stamp steel letters on the band one by one then push out the finished band, the press-stamping roller will back to the home position by the cylinder. The gap between two rollers can be adjusted manually to meet different band thickness.

首先是參數指標

Main Parameter

配備應用	Model Number	Номер модели	JYJ-600-AH
檔案資料它的厚度	material thickness	Толщина обода	≤4.5mm
工件表面高度	Rim Width	Ширина обода	≤320mm
內徑面積	Rim Diameter Range	Диаметр обода	300mm~500mm
輸送馬力	input capacity	Общая мощность	14KW

匠人的特點

該設備的電力電氣管理體制由可規律控制器PLC、干仗器、定頻器、伺服線束管理體制、汽車電器和各個檢側感知器具有。控制器辨別是非德力西開關M218系列的，德力西開關M218 PLC占地小、傳送速度快、正規化，享有串口通信功能，功郊強，靠經得住高。

This equipment’s electrical system consists of PLC (Programmable Logic Control), contactor, frequency converter, servo system, motor and different kinds of detecting sensor. The controller is used series M218 of Schneider, which is small, fast, reliable, standardizing and has ability of serial communication.

裝備的操縱形式

Equipment’s Operation Mode

冷水機有積極性和人工操作兩者世界任務體例，途經環節扳動“積極性/人工操作”變慢調選。The main machine has two kinds of working mode--- auto and manual, which can choose by turning the “auto/manual” button.

1手動形式

Manual Mode

零丁操控主機結構配置的任何取得成效，方便操控技術人員的代謝物研究生調劑和配置庇護。Operate every single action of main machine to make operator easy to adjust and maintain equipment.

2主動形式

Auto Mode

依據原有的西式開始主動地天道輪回，使用者只需耍裝料、切料便可。Work circularly and automatically by the set process, the operator only needs to load and unload material.

聯動/單動

single/linkage

主機設備和分手后送料系統有互通和單動兩個工作任務體例，經途進程扳動“互通/單動”立即停止調選。There are two working mode for main machine and automatically feeding device--- single and linkage, which can be chosen by turning “linkage/single” button.

單動形式

single mode

在積極自覺的形式下，主要復印和卷圓機、壓平機積極自覺生死輪回，中含放料平臺。Under the auto mode can only circularly work stamper and flattener without feeding device.

聯動形式

linkage mode

在相互行駛下，在打印文件和卷圓機相互命輪中增加相互裝料作用，工人們只有將料垛都放在上料功能小奧迪車便可。Under the auto mode, add automatically feeding function to automatical circle of stamping and coiler, worker only need to put material on the feeding dolly.

說話切換

Language

按壓“發聲變換”后顯出如下圖所示，立即停止英中文變換。Click “language” to get into the interface like above picture, where can choose language between Chinese and English.